An often confusing point is size, without that we cannot give a price and to measure see diagram below. Often it is helpful to measure the space where the sign is going…to see if it will fit. OR if it is the right size for the space, try using cardboard cut out in the size you want to see how it works in the space.
Matching T30 Screws thru face 3 inch length
Vinyl, Stucco, Wood Siding, Similar to the keyholes but the screws go through the face.
Eyelets for hanging stake / bracket
Hanging stake is a seperate purchase and not included in this option. 
48″ STRAIGHT ground stake-stake
Straight as an arrow! And 48 inches but we can cut to any size if you like. Please specify in the comments section the length you want.
48″ ANGLED ground stake-stake
30 degree angle, 48 inches BUT can cut to any size if you like. Please specify in the comments section the length you want.
Standoffs
Used for uneven surfaces. More than an inch in height difference from one screw location to the other. Most complicated option.
Ubolts for fence
Need to know is it a vertical or horizontal post? ALSO, post width, post depth and distance center to center of posts. Please leave information in comments section at checkout.
Standard Etched Metal
Cast Metal Options
Atlas Signs and Plaques Metal Finishes
Metal Coated HDU Options
Atlas Signs and Plaques Metal Finishes
Solid Wall Mount
Through hole mount. Screw heads are visible. Rosettes are provided to cover screw heads.
Hollow Wall Mount
Through hole mount. Screw heads are visible. Rosettes are provided to cover screw heads.
Wood Mount
Through hole mount. Screw heads are visible. Rosettes are provided to cover screw heads.
Blind Mount
Drilled and Tapped. No mounting hardware is visible.
Post Mount
Example of raised lettering
Example of recessed lettering
Some font choices for Atlas signs and plaques.
This list is not all inclusive so if you don’t see what you want it doesn’t mean I don’t have it.
A few decorative elements and arrows to choose from for your custom Atlas Sign or Plaque. Please note that the number is to the left of the desired element. And that arrows should be designated to the direction that they point. If you have something else in mind that tell me that too.
Here are some ideas for shapes when ordering a sign or plaque. If you have something else in mind, let us know.
An often confusing point is size, without that we cannot give a price and to measure see diagram to the right. Often it is helpful to measure the space where the sign is going…to see if it will fit. OR if it is the right size for the space, try using cardboard cut out in the size you want to see how it works in the space.